Residual Capacitance Estimation in Lithium-Thionyl-Chloride Chemical Current Sources using Impedance Spectroscopy

Purpose of this work is to elaborate operational and reliable method for ensuring non-destructive control over primary lithium-thionyl-chloride chemical current sources (LCCS) using the impedance spectroscopy. Results and conclusions presented in this work are based on a series of experimental studies. Result reliability was experimentally proven on models and samples with known characteristics. Mathematical apparatus used in processing experimental data using the Fourier transforms allows obtaining information on impedance in a wide frequency range based on results of a single experiment and prompt calculating its main parameters (impedance imaginary value at the hodograph extreme point, its frequency, high-frequency resistance and phase). Ways to reduce the passive film influence, which is appearing on the lithium electrode during storage and operation, on the impedance characteristics are shown. Based on the electrochemical impedance spectra analysis, most informative frequency ranges were determined, and correlates were found connecting the impedance characteristics with the investigated current source state. It is proposed to use the phase angle value measured at the impedance hodograph extreme point as a correlate allowing to estimate the LCCS residual capacitance. It was determined that in assessing the LCCS discharge degree in the range of 0--70 % residual capacity, results of impedance spectroscopy are being quite informative

Литература

[1] Li N., Hu R.-Z. Determination of thermal conductivities of solids by microcalorimetry. Thermochim. Acta, 1994, vol. 231, pp. 317--331. DOI: https://doi.org/10.1016/0040-6031(94)80034-0

[2] Chen X. An absolute method for determination of thermal conductivities of thermal insulators by microcalorimetry. J. of Therm. Sci., 1996, vol. 5, pp. 93--98. DOI: https://doi.org/10.1007/s11630-996-0004-z

[3] Howard W.G., Buchman R.C., Owens B.B., et al. Power Sources 10. Academic Press, 1985.

[4] Rongzu H., Xuelin C., Shijin C., et al. A new method of determining the thermal conductivities of energetic materials by microcalorimeter. Journal of Thermal Analysis, 1994, vol. 42, pp. 505--520. DOI: https://doi.org/10.1007/bf02548532

[5] Wagner N. Characterization of membrane electrode assemblies in polymer electrolyte fuel cells using a.c. impedance spectroscopy. J. Appl. Electrochem., 2002, vol. 32, no. 8, pp. 859--863. DOI: https://doi.org/10.1023/A:1020551609230

[6] Stoynov Z.B., Grafov B.M. Elektrokhimicheskiy impedans [Electrochemical impedance]. Moscow, Nauka Publ., 1991.

[7] Macdonald D.D. Reflections on the history of electrochemical impedance spectroscopy. Electrochim. Acta, 2006, vol. 51, iss. 8-9, pp. 1376--1388. DOI: https://doi.org/10.1016/j.electacta.2005.02.107

[8] Paganin V.A., Oliveira C.L.F., Ticianelli E.A., et al. Modelistic interpretation of the impedance response of a polymer electrolyte fuel cell. Electrochim. Acta, 1998, vol. 43, iss. 24, pp. 3761--3766. DOI: https://doi.org/10.1016/S0013-4686(98)00135-2

[9] Wagner N., Schnurnberger W., Müller B., et al. Electrochemical impedance spectra of solid-oxide fuel cells and polymer membrane fuel cells. Electrochim. Acta, 1998, vol. 43, iss. 21, pp. 3785--3793. DOI: https://doi.org/10.1016/S0013-4686(98)00138-8

[10] Lukavtsev V.P., Rotenberg Z.A., Dribinskii A.V., et al. Estimating depth of discharge of lithium-thionyl-chloride batteries from their impedance characteristics. Russ. J. Electrochem., 2005, vol. 41, no. 10, pp. 1097--1100. DOI: https://doi.org/10.1007/s11175-005-0187-8

[11] Petrenko E.M., Dribinskiy A.V., Klyuev A.L. Methodical maintenance impedance spectroscopy for lithium chemical power sources. Elektrokhimicheskaya energetika [Electrochemical Energetics], 2010, vol. 10, no. 3, pp. 128--132 (in Russ.).

[12] Dribinskiy A.V., Lukovtsev V.P., Maksimov E.M., et al. Sposob opredeleniya ostatochnoy emkosti pervichnogo istochnika toka [Method for defining residual capacity of primary cell]. Patent RU 2295139. Appl. 21.04.2005, publ. 10.03.2007 (in Russ.).

[13] Rahmoun A., Loske M., Rosin A. Determination of the impedance of lithium-ion batteries using methods of digital signal processing. Energy Procedia, 2014, vol. 46, pp. 204--213. DOI: https://doi.org/10.1016/j.egypro.2014.01.174

[14] Kanevskiy L., Bagotskiy V., Nizhnikovskiy E. The possibility of using impedance meter to diagnose the state of elements of lithium-thionyl-chloride system. Elektrokhimiya, 1995, vol. 31, no. 4, pp. 376--382 (in Russ.).

[15] Klyuev A.L., Grafov B.M., Davydov A.D., et al. Analysis of discrete spectra of electrochemical noise of lithium power sources. J. Solid State Electrochem., 2019, vol. 23, no. 2, pp. 497--502. DOI: https://doi.org/10.1007/s10008-018-4156-z

[16] Klyuev A.L., Rotenberg Z.A., Batrakov V.V. Impedance of a passive iron electrode in a solution containing a reducing agent. Russ. J. Electrochem., 2005, vol. 41, no. 1, pp. 87--90. DOI: https://doi.org/10.1007/s11175-005-0010-6