Energy and Exergy Analysis on Spark Ignition Engines under Varying Ignition Timing with Pure Bioethanol Fuel

Abstract

The first and second laws of thermodynamics analysis used to show the rate of energy and exergy as a performance of SI-PFI engine with the variation of fuel ignition between 10 and 26 BTDC (before top dead Centre) at interval 4 BTDC. The engine was performed on eight levels of speed in intervals 2000--8000 RPM (increment of 1000 RPM) with pure bioethanol fuel (E100) and 13:1 of compression ratio. The effect of fuel ignition on energy and exergy analysis of E100 fuel will be compared with E0 as reference fuel that performed in 11:1 of compression ratio and 10 BTDC. The results show that the maximum efficiency of energy and exergy for the E100 are 46.59 and 41.90 % at 18 BTDC and 6000 RPM. Meanwhile, the maximum efficiency of energy and exergy for E0 were 43.33 and 31.76 % at 5000 RPM. Moreover, the minimum BSFC for the E100 is 0.2867 kg/(kW•h) at 6000 RPM and 18 BTDC while for the E0 is 0.1960 kg/(kW•h) at 5000 RPM. These results indicate that E100 is more effective in transferring heat into useful work although it is 30 % more wasteful than E0

Please cite this article as:

Paloboran M., Syam H., Yahya M., et al. Energy and exergy analysis on spark ignition engines under varying ignition timing with pure bioethanol fuel. Herald of the Bauman Moscow State Technical University, Series Natural Sciences, 2023, no. 2 (107), pp. 140--159. DOI: https://doi.org/10.18698/1812-3368-2023-2-140-159

Литература

[1] de Medeiros E.M., Noorman H., Filho R.M., et al. Production of ethanol fuel via syngas fermentation: optimization of economic performance and energy efficiency. Chem. Eng. Sci.: X, 2020, vol. 5, art. 100056. DOI: https://doi.org/10.1016/j.cesx.2020.100056

[2] Paloboran M., Darmawan R.F.D., Sudarmanta B. Suitable injection duration of pure ethanol fuel for motorcycle at a high compression ratio. Dyna Journal, 2017, vol. 92, no. 5, pp. 587--592. DOI: https://doi.org/10.6036/8272

[3] Paloboran M., Sutantra I.N., Sudarmanta B., et al. A strategy in adjustment of combustion parameters of SI-PFI engine with pure bioethanol fuelled for a high performance and low emission. WSEAS Trans. Environ. Dev., 2017, vol. 13, pp. 410--420.

[4] Paloboran M., Sutantra I.N., Sudarmanta B. Performances and emissions characteristics of three main types composition of gasoline-ethanol blended in spark ignition engines. IREME, 2016, vol. 10, no. 7, pp. 552--559. DOI: https://doi.org/10.15866/ireme.v10i7.9968

[5] Jiao J., Li J., Bai Y. Ethanol as a vehicle fuel in China: a review from the perspectives of raw material resource, vehicle, and infrastructure. J. Clean. Prod., 2018, vol. 180, pp. 832--845. DOI: https://doi.org/10.1016/j.jclepro.2018.01.141

[6] Efemwenkiekie U.K., Oyedepo S.O., Idiku U.D., et al. Comparative analysis of a four stroke spark ignition engine performance using local ethanol and gasoline blends. Procedia Manuf., 2019, vol. 35, pp. 1079--1086. DOI: https://doi.org/10.1016/j.promfg.2019.06.060

[7] Tian Z., Zhen X., Wang Y., et al. Comparative study on combustion and emission characteristics of methanol, ethanol and butanol fuel in TISI engine. Fuel, 2020, vol. 259, art. 116199. DOI: https://doi.org/10.1016/j.fuel.2019.116199

[8] Elfasakhany A. Gasoline engine fueled with bioethanol-bio-acetone-gasoline blends: performance and emissions exploration. Fuel, 2020, vol. 274, art. 117825. DOI: https://doi.org/10.1016/j.fuel.2020.117825

[9] Goktas M., Balki M.K., Sayin C., et al. An evaluation of the use of alcohol fuels in SI engines in terms of performance, emission and combustion characteristics: a review. Fuel, 2021, vol. 286, part 2, art. 119245. DOI: https://doi.org/10.1016/j.fuel.2020.119425

[10] Chansauria P., Mandloi R.K. Effects of ethanol blends on performance of spark ignition engine --- a review. Materials Today: Proceedings, 2018, vol. 5, iss. 2, part 1, pp. 4066--4077. DOI: https://doi.org/10.1016/j.matpr.2017.11.668

[11] Sakthivel P., Subramanian K.A., Mathai R. Effects of different compression ratios and spark timings on performance and emissions of a two-wheeler with 30 % ethanol-gasoline blend (E30). Fuel, 2020, vol. 277, art. 118113. DOI: https://doi.org/10.1016/j.fuel.2020.118113

[12] Nuthan Prasad B.S., Pandey J.K., Kumar G.N. Impact of changing compression ratio on engine characteristics of an SI engine fueled with equi-volume blend of methanol and gasoline. Energy, 2019, vol. 191, art. 116605. DOI: https://doi.org/10.1016/j.energy.2019.116605

[13] Mourad M., Mahmoud K. Investigation into SI engine performance characteristics and emissions fuelled with ethanol/butanol-gasoline blends. Renew. Energy, 2019, vol. 143, pp. 762--771. DOI: https://doi.org/10.1016/j.renene.2019.05.064

[14] Nwufo O.C., Nwaiwu C.F., Ononogbo C., et al. Performance, emission and combustion characteristics of a single cylinder spark ignition engine using ethanol--petrol-blended fuels. Int. J. Ambient. Energy, 2018, vol. 39, iss. 8, pp. 792--801. DOI: https://doi.org/10.1080/01430750.2017.1354318

[15] Reddy P.N., Khayum N., Paruvada S.K., et al. Experimental study on combustion characteristics of a CI engine runs on a renewable fuel. Int. J. Ambient. Energy, 2022, vol. 43, iss. 1, pp. 2003--2018. DOI: https://doi.org/10.1080/01430750.2020.1722743

[16] Jeuland N., Montagne X., Gautrot X. Potentiality of ethanol as a fuel for dedicated engine. Oil Gas Sci. Technol., 2010, vol. 59, no. 6, pp. 559--570. DOI: https://doi.org/10.2516/ogst:2004040

[17] Hu T., Wei Y., Liu S., et al. Improvement of spark-ignition (SI) engine combustion and emission during cold start, fueled with methanol/gasoline blends. Energy Fuels, 2007, vol. 21, iss. 1, pp. 171--175. DOI: https://doi.org/10.1021/ef0603479

[18] Kotas T.J. The exergy method of thermal plant analysis. Krieger, 1995.

[19] Paloboran M., Darmawang D., Mandra M.A.S., et al. Performance investigation of steam boiler of PLTU Tello Makassar using energy--exergy and entropy balance approach. IREE, 2020, vol. 15, no. 5, pp. 431--442. DOI: https://doi.org/10.15866/iree.v15i5.17956

[20] Nazzal I.T., Kamil M. Energy and exergy analysis of spark ignited engine fueled with gasoline-ethanol-butanol blends. AIMS Energy, 2020, vol. 8, iss. 6, pp. 1007--1028. DOI: http://doi.org/10.3934/energy.2020.6.1007

[21] Sohret Y., Gurbuz H., Akcay I.H. Energy and exergy analyses of a hydrogen fueled SI engine: effect of ignition timing and compression ratio. Energy, 2019, vol. 175, pp. 410--422. DOI: https://doi.org/10.1016/j.energy.2019.03.091

[22] Kotas T.J. Thermodynamic principles of energy degrading. Int. J. Heat. Fluid, 1982, vol. 3, iss. 1, p. 12. DOI: https://doi.org/10.1016/0142-727X(82)90039-X

[23] Dincer I., Rosen M.A. Exergy analysis of heating, refrigerating, and air conditioning. Academic Press, 2015.

[24] de Oliveira S.Jr. Exergy: production, cost and renewability. In: Green Energy and Technology. London, Springer, 2013. DOI: https://doi.org/10.1007/978-1-4471-4165-5

[25] Moran M.J., Shapiro H.N. Fundamentals of engineering thermodynamics. Wiley, 2006.

[26] Kul B.S., Kahraman A. Energy and exergy analyzes of a diesel engine fuelled with biodiesel-diesel blends containing 5 % bioethanol. Entropy, 2016, vol. 18, iss. 11, art. 387. DOI: https://doi.org/10.3390/e18110387

[27] Prasad K.S., Rao S.S., Raju V.R.K. Effect of compression ratio and fuel injection pressure on the characteristics of a CI engine operating with butanol/diesel blends. Alex. Eng. J., 2021, vol. 60, iss. 1, pp. 1183--1197. DOI: https://doi.org/10.1016/j.aej.2020.10.042

[28] Hotta S.K., Sahoo N., Mohanty K., et al. Ignition timing and compression ratio as effective means for the improvement in the operating characteristics of a biogas fueled spark ignition engine. Renew. Energy, 2020, vol. 150, pp. 854--867. DOI: https://doi.org/10.1016/j.renene.2019.12.145

[29] Bhatti S.S., Verma S., Tyagi S.K. Energy and exergy based performance evaluation of variable compression ratio spark ignition engine based on experimental work. Therm. Sci. Eng. Prog., 2019, vol. 9, pp. 332--339. DOI: https://doi.org/10.1016/j.tsep.2018.12.006

[30] Sharma P.K., Sharma D., Soni S.L., et al. Energy, exergy, and emission analysis of a hydroxyl fueled compression ignition engine under dual fuel mode. Fuel, 2020, vol. 265, art. 116923. DOI: https://doi.org/10.1016/j.fuel.2019.116923

[31] Rufino C.H., de Lima A.J.T.B., Mattos A.P., et al. Exergetic analysis of a spark ignition engine fuelled with ethanol. Energy Convers. Manag., 2019, vol. 192, pp. 20--29. DOI: https://doi.org/10.1016/j.enconman.2019.04.035

[32] Dincer I., Rosen M.A. Exergy and energy analyses. In: Energy-Environment and Sustainable Development. Elsevier, 2021, pp. 23--35.

[33] Yesilyurt M.K. The examination of a compression-ignition engine powered by peanut oil biodiesel and diesel fuel in terms of energetic and exergetic performance parameters. Fuel, 2020, vol. 278, art. 118319. DOI: https://doi.org/10.1016/j.fuel.2020.118319

[34] Dincer I. Energy and exergy efficiencies. In: Comprehensive Energy Systems. Vol. 1. Elsevier, 2018, pp. 265--339.